Frequently Asked Questions

The building satisfies the energy efficiency class С. The thermotechnical and energy indicators of the building envelope meet DBN V.2.6-31 requirements and the calculation procedure is followed, which provides:

• rational use of energy resources for heating the premises of the building;
• normative indicators of sanitary and hygienic parameters of the microclimate of premises;
• durability of enclosing structures during building operation.

A foundation concrete block (FBS 9-3-6 t) is used to secure the module, which is then mounted on a sand and crushed stone-prepared flat platform. Alternative foundation types include:

• screw piles (geostructures);
• strip foundation;
• single-blade screw piles with base concreting.

The installation of an individual well is the way water is supplied. An individual septic tank is responsible for drainage.

Each module strictly adheres to the rules for installing electrical equipment, which is usually the main source of ignition during construction. A complex of fire-fighting measures is utilized, which involves treating wooden elements with fire-proofing means.

The wooden frame is completely safeguarded against moisture. A waterproofing film and a shaped metal sheet are used to protect the outer side. A vapor-sealing film and waterproof plywood are used to protect the frame from the middle.

Our modular house is guaranteed to operate for 20 years.

Partly dismantling the outer wall and finishing the facade are necessary when expanding from one module to two. After connecting the second module, finish the expansion joint.

The module is delivered by lowboy truck.

A wire galvanized mesh that is 0.6 mm in diameter and 10x10 mmin size protects the lower part of the house from rodents.

The module comes with a ventilation exhaust system for both the bathroom and kitchen. The OSB plates that are inside are only utilized for floor panels and are attached to the frame with nails, resulting in no glue smell inside.

The module has the ability to be moved to any other site. Neither structural properties nor geometry are affected.

The elevation of the module installation is contingent on the results of the geological and geodetic conclusions of the site. Drainage is not required, due to the fact that according to the project the module is installed above the ground at a certain height, thereby there is a free ventilated space between the floor and the ground.

The bathroom's exhaust fan has enough power to prevent moisture and its subsequent effects on the room.

All electrical safety rules and norms will be followed when grounding the house at the final location.

An additional design for current removal ensures that lightning protection is provided. The client has the option to purchase it as a distinct option.

The modular house's main priorities are to construct it with efficiency, environmental friendliness, cost, the possibility of expanding the area, and the possibility of moving. The ability to achieve high insulation capacity is achieved through modules that are properly designed and insulated.

The materials used to build the modular house are free of harmful substances.

Modular houses use an electric convector to provide heating.

The hood is responsible for providing ventilation in the kitchen room. The bathroom has an exhaust fan included.

Our technology allows you to increase the house's area by connecting other modules, making it possible to increase the room size from 25.6 m² up to 53.7 m² or up to 81.5 m² .